Select your logger from the buttons at the side
Logger Manager:
General Window
Select the logger you
want
Channels
Window
Select any channel that is free
NOTE – Formula
Renualt EVO 3 Users can only choose Channels 4 - 8
Give it a name (eg Front suspension)
Sampling rate 100Hz (recommended at least)
Select Zero Based
Potentiometer from the pull down menu
Enter the Lower and Upper Bounds expected to be seen
Click on the Transmit
button
Click on the Calibrate button
Calibration Window
Click on the
blue Calibrate button next to the
channel you wish to calibrate
Sensor Calibration
Window
1. With the
suspension potentiometer connected, and the vehicle in normal static
conditions, click on the GET RAW VALUE button for the ZERO POSITION
2. Measure the length of the potentiometer's stroke
3. Disconnect one end of the potentiometer from the
vehicle
4. Move the stroke of the potentiometer a known distance in the
direction you would define as positive displacement (eg) Move the stroke of the
potentiometer a known distance in the direction you would define as positive
displacement (eg) 10mm 10mm
5. Click on the GET RAW
VALUE button for the HIGH
POSITION
6. Enter the distance moved in the text box for the
HIGH POSITION (eg 10)
7. The actual displacement will now appear in the measure
box
8. Make sure that the potentiometer is mounted correctly to
record the full range of suspension travel in both directions
9.Make sure that the positive and negative travel measures add
up to the travel of the potentiometer (eg 100mm positive plus 50mm negative
suspension travel for a 150mm potentiometer)
10. Click on
the OK button
Calibration Window
Click on the
red Transmit calibration
button
System Manager
Repeat the
process for remaining potentiometers
Technical Specifications
| Wiring Code – binder 719 & 712 |
| Red |
5V |
4 |
| Black |
0V |
2 |
| White |
signal |
1 |
| Wiring Code – 3way mini sureseal
receptacle |
| Red |
5V |
2 |
| Black |
0V |
3 |
| White |
signal |
1 |
| Wiring Code for Mychron3 gold & plus |
| Red |
+Vref |
pin G or K |
| Black |
0V |
pin B, D,
F or J |
| White |
signal |
pin A, C, E
or H |
| Wiring Code for ST1 |
| Red |
+Vref |
pin D or V |
| Black |
0V |
pin S, T, U
or F |
| White |
signal |
pin A, B,
C or E |
