 |
 |
 
<< back
|
 |
|
Analogue output cable #3730 |
|
6 foot, mini to stripped-and-tinned, matching LM-1 analogue output specifications. The cable has two analogue outputs (0-5 volts) that are fully programmable with the LM-1 software.
**Accessory for LM-1 ONLY** |
|
|
 |
|
Bung and plug set, Mild steel #3735 |
|
Steel bung and plug set
Weight: 0.05 lbs |
|
|
 |
|
Stainless steel Lambda bung kit #3736 |
|
| Stainless lambda bung/plug kit |
|
|
 |
|
Lambda Sensor Bosch 4.2 #3737 |
|
| Bosch LSU4.2 5-wire, wide-band O2 sensor. Replacement sensor for LC-1, LM-1 and LC-1ST.
Weight: 1.00 lbs |
|
|
|
 |
|
LMA-3 AuxBox #3742 |
|
The AuxBox makes the LM-1 into a complete tuning kit, allowing the user to capture, view and analyse data on all 6 channels that the LM-1 can log internally.
|
|
|
 |
|
LC1 Lambda controller cable #3744 |
|
The LC-1 is a complete wideband controller featuring the award-winning digital measurement principal also found in the LM-1. Digital input, output and 2 programmable analogue outputs.
**Sensor not included** |
|
|
 |
|
Accessory Kit for LMA-3 and DL32 #3749 |
|
| Replacement parts for the loggers DL32 and LMA-3. |
|
|
 |
|
Cable daisy chain XD1 or LC1 #3760 |
|
Custom cable allowing you to connect and/or daisy chain: XD-16, LC-1, LMA-3, DL-32, SSI-4, TC-4, & ST-12.
Also used to connect the LM-1 to the XD-16. |
|
|
|
 |
|
LC1 Lambda cable and O2 sensor #3769 |
|
The LC-1 is a complete wideband controller featuring the award-winning digital measurement principal also found in the LM-1. Digital input, output and 2 programmable analogue outputs.
|
|
|
 |
|
Gauge kit #3781 |
|
| Standalone Gauge Kit - complete with LC-1 Wideband Controller, XD-16 Programmable Digital Gauge, Bosch 5-wire Wideband 02 Sensor, Bung/Plug Kit, Software CD, and owners manual |
|
|
 |
|
DL-32 datalogger and sensor controller #3782 |
|
| A complete vehicle-mounted data-logging system for advanced engine tuning. The system is anchored by digital wideband air/fuel ratio technology but also includes flexible sensors for RPM, MAP, temp, duty cycle and analog inputs |
|
|
 |
|
TC4 thermocouple amp 4 channel #3784 |
|
The TC-4 includes the TC-4, Program Cable, Patch Cable (to daisy chain with other MTS compatible devices), mounting hardware and CD which includes software and manuals.
Weight: 1.50 lbs |
|
| |
 |
|
G2 gauge #3803 |
|
The G2 Air/Fuel Ratio gauge (52mm) features a high-speed stepper motor, through-dial backlighting and an illuminated pointer.
The G2 Gauge can be used as an accessory to be used with the LC-1 or LM-1. It uses an analog output from a LC-1 or LM-1 and has no serial capability itself, it can only display AFR.
|
|
|
 |
|
G3 gauge #3804 |
|
The G3 Air/Fuel Ratio gauge (52mm) features a high-speed stepper motor, through-dial backlighting and an illuminated pointer.
The G3 Gauge can be used as an accessory to be used with the LC-1 or LM-1. It uses and analogue output from a LC-1 or LM-1 and has no serial capability itself, it can only display AFR.
|
|
|
|
|
LM-2 Single Channel Wideband W/OBDII #3806
|
|
LM-2 Single Channel Wideband W/OBDII
**Coming soon** |
|
|
|
|
LM-2 Pro-V Dual Channel Wideband W/OBDII #3807 |
|
LM-2 Pro-V Dual Channel Wideband W/OBDII
**Coming soon** |
|
|
| |
|
|
|
|
|
